Kunshan WonderTek Technology Co.,Ltd.
 
 
Powerline Ethernet Bridge Phoneline Ethernet Bridge Coaxial Ethernet Bridge BPL Powerline Ethernet Bridge Smart Grid Industry Wi-Fi/PoE Switch PLC-Blocking Filter&Coupler PLC-Access control system
1Gbps DIN Rail Industrial PLC Ethernet Bridge

Brief introduction:

DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 450Mbps. The product has been widely used in many aspect just as railway, mines, industrial Telecommunication and metro etc...
 

1.1 Highlight

1.1.1 Technical parameters             
Support G.hn;
Industrial DIN rail style installation;
Actual bandwidth up to 450Mbps;
The maximum transfer distance up to 800 meters;
Self-adapt the rate;
Compatible with all G.hn devices;
One Domain Master can manage 7pcs End Point;
There can be 7 groups(7 different Domain Master) of PLC telecommunication devices in the same power line circuit;
 
1.1.2 Manageability
Support Remote Firmware update(TR069);
802.3D Ethernet Bridge;
802.1Q VLAN;
Quality of Service(QoS) ;
IGMO(IPv4)Snooping&MLD(IPv6)Snooping;
Support local web management;
 
1.1.3Operating environment
Working temperature: -40℃-80℃;
Operating humidity: 10%-85% no condense;
Storage humidity: 5%-90% no condense;
 

Specification:

Interface

1*LAN 10/100/1000Base-TX self adaption RJ45,
1* power interface MDI/MDX support

LED display light

Ethernet, PLC link ,power

Transfer band

100MHz (based on G.9963)   50Mhz MIMO

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3u   G.hn

Security

128-AES

Bus unit per segment

Up to 7

Installation

Rail  TS35

Protection type

IP40

Transfer rate(PHY)

800Mbps

Modulation

OFDM

Effective transfer rate

TCP/IP  450Mbps

Manageability

Remote Firmware update,support TR-069(optional)

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Operating temperature

-40℃-80℃

Size

120*90*45 (mm)(L×W×H)

Weight

0.65kg

Operating environment

Operating humidity:10%-85% (no condense)

Storage humidity: 5%-90%(no condense)

Certification

FCC、CE class B, RoHS

 

1.2 Features

(1) Packet loss:≤0.1%(100M,load 70%).
(2) Support 7*24 hours all weather operation.
(3) Hardware watch dog function.
(4) PING≤2MS, Up to 16 pcs in each group.
 

1.3 Immunity of ESD

The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
 

1.4 Immunity of electrical fast transient impulse group(Common mode)

The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz,
test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
 

1.5 Anti interference of surge impact

The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
 

1.6 Anti-vibration

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
 

System Topology:

------------------------------------------------------------------------------------------------------------------------------------------------------
  AC 3 phases+1 N(4-wire link to the device connected to the input end of the network, and L+N link to the terminal network device)
------------------------------------------------------------------------------------------------------------------------------------------------------

 
------------------------------------------------------------------------------------------------------------------------------------------------------
  AC 3phases +1N(each device needs four wires)
------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
------------------------------------------------------------------------------------------------------------------------------------------------------
  AC  3Phases
--------------------------------------------------------------------------------------------------------------------------------------------------------------

 
------------------------------------------------------------------------------------------------------------------------------------------------------
  AC:                   
------------------------------------------------------------------------------------------------------------------------------------------------------


 

------------------------------------------------------------------------------------------------------------------------------------------------------
  DC:               
------------------------------------------------------------------------------------------------------------------------------------------------------

 

Product model selection:

Model

Ethernet Port

Line Environment

Network Structure

WD-1001M-DIN-SG-T

1

AC(3 phases+N)

Network access points must be connected in 3 phases, and terminals can be mixed in 3 phases and 1 phase (85-520V)

WD-1001M-DIN-SG-T4

1

AC(3 phases+N)

Network access points and terminals require uniform standard connections (85-520V) 

WD-1001M-DIN-SG-V3

1

AC(3 phases)

Only three phase connection, and according to the unified standard wiring (85-520V)

WD-1001M-DIN-SG-A

1

AC(phase + null + ground) 

Single phase with or without ground (85-520V)

WD-1001M-DIN-SG-D01

1

DC

9-36V

WD-1001M-DIN-SG-D02

1

DC

18-72V

WD-1001M-DIN-G-T

1

AC(3 phases+N)

Network access points must be connected in 3 phases, and terminals can be mixed in 3 phases and 1 phase (85-520V)

WD-1001M-DIN-G-T4

1

AC(3 phases+N)

Network access points and terminals require uniform standard connections (85-520V) 

WD-1001M-DIN-G-V3

1

AC(3 phases)

Only three phase connection, and according to the unified standard wiring (85-520V)

WD-1001M-DIN-G-A

1

AC(phase + null + ground) 

Single phase with or without ground (85-520V)

WD-1001M-DIN(D)

1

DC

10-80V

 
 
 
Share:

Contact us

0512-83670078

15962529299
Available Time: 9:00-20:00 GMT+8
Learn more
Copyright © 2018 Kunshan WonderTek Technology Co.,Ltd.         
Tel Map