Kunshan WonderTek Technology Co.,Ltd.
 
 
Powerline Ethernet Bridge Phoneline Ethernet Bridge Coaxial Ethernet Bridge BPL power line carrier Smart Grid Industry Wi-Fi/PoE Switch Power carrier isolator&Coupler 4G/5G Router,LTE CPE
1 Gbps DIN rail industrial Coaxial Ethernet Bridge

Brief introduction

DIN rail industrial Coaxial Ethernet Bridge is a telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD, it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many areas such as railway, mines, industrial telecommunication and metro etc...
 

1.1 Highlight

1.1.1 Technical parameters

 Support G.hn.
 Industrial DIN rail style installation.
 Actual bandwidth up to 400Mbps.
 The maximum transmit distance up to 1000 meters.
 Self-adaption rate.
 Compatible with all G.hn devices.
 One Domain Master can manage 15pcs End Point.
 There can be 16 groups(16 different Domain Master) of telecommunication devices.

1.1.2 Manageability

 Support Remote Firmware update(TR069).
 802.3D Ethernet Bridge.
 802.1Q VLAN.
 Quality of Service(QoS). 
 IGMO(IPv4)Snooping &MLD(IPv6)Snooping.
 Support local web management.

1.1.3 Operating environment

 Working temperature: -40℃-80℃.
 Operating humidity: 10%-85% no condense.
 Storage humidity:5%-90% no condensation.

1.1.4 Design standards

 ITU-T G.9960.
 IEC 60529.
 IEC 50022.
 IEC 60068-2-6.
 MIL-STD-810G.

 

1.2 Features

(1) Packet loss:≤0.1%(100M,load70%).
(2) Support 7*24 hours all weather operation.
(3) hardware watch dog function.
(4) PING≤2MS.
(5) The quantity of the group ≤16pcs.

1.3 Immunity of ESD

The testing voltage which the device should be beared: ±6kV direct discharge, ±8kV air discharge;
Discharge number in each sensitive testing point:Plus-n-Minus 10 times each;
The discharge interval is 1 s. 
According to B/T.17626.2-2006.

1.4 Immunity of electrical fast transient impulse group(Common mode)

The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV; 
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz; 
test duration: 1 min/ time; 
testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.


Specification

Model

WD-C1000M-DIN

Interface

1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface MDI/MDX  support

LED display light

Ethernet, PLC link ,power 

Transfer band

25,50 and 100MHz and MIMO (based on G.9963)

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3u   G.Hn

Security

128-AES

Transfer rate(PHY)

1000Mbps

Modulation

OFDM

Effective transfer rate

TCP/IP  800Mbps    

Manageability

Remote Firmware update,support TR-069(optional)

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Working voltage

9V-72V

Operating temperature

-40℃-80℃

Size

67*160*123 (mm)(L×W×H)

Weight

0.30kg

Operating environment

Operating humidity:10%-85% (no condense)

Storage humidity: 5%-90%(no condense)

Certification

FCC、CE class B,WEEE,RoHS

 

1.5 Anti interference of surge impact

The testing voltage which the device should be beared: ±2kV; 
the interval of continuous impulses: 1min/time.;
test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

1.6 Anti- vibration

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

1.7 System topology

COAX75ohm
100meter about 500Mbps
200meter about 400Mbps
300meter about 300Mbps
400meter about 150Mbps
500meter about 90Mbps
600meter about 50Mbps
800meter about 40Mbps

 
Share:

Contact us

0512-83670078

15962529299
Available Time: 9:00-20:00 GMT+8
Learn more
Copyright © 2018 Kunshan WonderTek Technology Co.,Ltd.         
Tel Map