[ Welcome to visit our company! ]
  CHINESE  |  ENGLISH
 
Product list
Contact us
WD-1000M-DIN(T/V/S)

DIN rail industrial powerline Ethernet bridge

Date:2016-7-4 10:37:06 Hits:2245

DIN rail industrial powerline Ethernet bridge
1Gbps G.hn WD-1000M-DIN(S/T/V/D)


 
Brief introduction

DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..

1.1 Highlight

1.1.1 Technical parameters             
Support G.hn.
Industrial DIN rail style installation
Actual bandwidth up to 400Mbps
The maximum transfer distance up to 1000 meters
Self-adapt the rate 
Compatible with all G.hn devices
One Domain Master can manage 15pcs End Point。
There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit 
1.1.2 Manageability 
Support Remote Firmware update(TR069)
802.3D Ethernet Bridge。
802.1Q VLAN。
Quality of Service(QoS) 。
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Support local web management
1.1.3Operating environment


Working temperature:  -40℃-80℃。
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense
1.1.4 Design standards
ITU-T G.9960
IEC 60529
IEC 50022

IEC 60068-2-6

MIL-STD-810G

Model

WD-1000M-DIN(S/T/V)   

WD-1000M-DIN(D)

Interface

1*LAN 10/100/1000Base-TX self adaption RJ451*AC power interface MDI/MDX support

1*LAN 10/100/1000Base-TX self adaption RJ451*DC power interface MDI/MDX  support

LED display light

Ethernet, PLC link ,power 

Transfer band

25,50 and 100MHz and MIMO (based on G.9963)

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3u   G.Hn

Security

128-AES

Transfer rate(PHY)

800Mbps

Modulation

OFDM

Effective transfer rate

TCP/IP  400Mbps   

Manageability

Remote Firmware updatesupport TR-069optional

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Working voltage

AC 90V-520V 

12V-300V

Operating temperature

-40℃-80℃

Size

67*160*123 (mm)(L×W×H)

Weight

0.35kg

0.30kg

Operating environment

Operating humidity:10%-85% (no condense)

Storage humidity: 5%-90%(no condense)

Certification

FCC、CE class B,WEEE,RoHS


1.2 Features

Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation
Hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration 
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test. 
1.7 System topology







Previous:WD-CF1000M
Copyright ◎ 2015 Kunshan WonderTek Technology Co.,LTD. All Rights Reserved
TEL : +86-512-83670078 Mob:+86-15962529299 / FAX : +86-512-55001422   By:wondertek